Home » Airport Lighting » Airport Guidance Systems » Aerodrome Beacon – ABN

Aerodrome Beacon – ABN

Certified Aerodrome Beacon According to Standards:

ICAO: Annex 14, Volume I – Aerodrome Design and Operations
IEC TS 61827: Electrical installations for lighting and beaconing of aerodromes.
Characteristics of inset and elevated luminaires used on aerodromes
and heliports

Category	Airport Guidance Systems, Airport Lighting
Product Code	AL - 082 - 84 - WH - 84 - GR

Add to my list Share this page

Description
Downloads
Related products
Send an inquiry

Add to my list

Aerodrome Beacon Application

The Aerodrome Beacon is a powerful, omnidirectional white and green light intended to signal the presence of an Airport.

Identification Beacon Description

Light fixture body: powder-coated aluminum, RAL 1004 (aviation yellow)
Diffuser: clear poly-carbonate
Cable gland: nickel-plated brass
Fasteners: stainless steel
Light fixtures are provided with anti condensation valve
Light fixtures are UV protected

Electrical Characteristics

The Aerodrome Beacon must be powered and controlled by a special controller which creates the flashing sequence and alow the brightness control. The Aerodrome Beacon can be also controlled by the main airport controller.

Maximum pick power consumption is 150 W.

The average consumption is less than 50W.

Optical Characteristics

The aerodrome beacon uses OSRAM white and green LEDs.

The beam is omnidirectional and the vertical distribution is from 0 to 10 degrees.

The brightness intensity values comply with: ICAO Annex 14 Vol.2 fig.5-11/1

The measured trichromatic coordinates correspond to color range requirements in:
ICAO Annex 14 – Aerodromes Vol.1, fig. A1-1-1b – Colors for aeronautical ground lights (solid-state lighting).

Brightness control is made in three steps 3, 10 and 100%.

Download Aerodrome Beacon – ABN datasheet

Aerodrome Beacon - ABN Datasheet

PDF 683 KB Download PDF

Send an inquiry